Load feeders and motor starters

Load feeders & motor starters

Compact Design that saves space in the control cabinet.

Little planning and assembly work and far less wiring thanks to a single complete unit with one article number
Low variance and therefore low stock levels, with two wide voltage ranges and five wide setting ranges for the rated current
High plant availability through integrated functionalities such as prevention of main contact welding and disconnection at end of service life
Enhanced productivity through automatic device reset in case of overload and differentiated detection of overload and short circuit
Easy checking of the wiring and testing of the motor direction prior to start-up thanks to optional control kits
Speedy replacement of devices thanks to removable terminals with spring-loaded and screw connections in the main and control circuit
Efficient power distribution through the related SIRIUS infeed system for 3RA6
Direct connection of the motor feeder cable to the SIRIUS infeed system for 3RA6 thanks to integrated PE bar
Connecting and looping through incoming feeders up to a cross-section of 70 mm²
When using the infeed system for 3RA6, possibility of directly connecting the motor cable without intermediate terminals
Integration in Totally Integrated Automation thanks to the optional connection to AS-Interface or IO-Link

PDF

Sirius Industrial Controls Catalog IC 10 Edition 2019

Minimum planning and assembly work and far less wiring with the preassembled complete units.

Plug-in connectors from the motor starter protector to all types of SIRIUS controls, for quicker and error-free assembly of feeders with screw and spring-type terminals
High planning reliability through consistent combination tests for fuseless and fused configurations according to IEX and UL/CSA
Comprehensive approvals for use worldwide on request, see www.siemens.com/industrial-controls/support
High operational reliability through short-circuit breaking capacity of 150 kA with type of coordination “1” and “2”
Uniform accessories for sizes S00, S0, S2 and S3
Spring-type terminals possible throughout: Enhanced operational reliability (vibration-resistant wiring) and less wiring work thanks to plug-in connections (S00 and S0 only)
Power loss 5 to 10% smaller than for comparable devices, hence lower energy consumption
Connection of feeders to the control system through standardized system connection (IO‑Link and AS‑i), for fast integration in TIA and less wiring work

PDF

Sirius Industrial Controls Catalog IC 10 Edition 2019