survey
title-check us out

News & Events



Gas Flow Measurement and Control Products

 
  Air Flowmeter (MCF)
The MCF is a mass flowmeter specifically for compressed air or nitrogen use. It incorporates Yamatake's Micro Flow thermal mass-flow rate sensor. The MCF can measure mass-flow rate sensor. The MCF can measure mass flow with an accuracy of ‡3% FS over a 50:1 measurement range. Forward and reverse flow integration functions are provided. Measurement is possible at up to 2 times the standard range with an accuracy of ‡10% rdg.

     
 
  Gas Mass Flowmeter (Resin, SUS and SUS316) (CMS)
The CMS is a highly reliable gas mass flowmeter that uses the Yamatake µF (Micro Flow) sensor as its sensing element. The µF sensor is a MEMS thermal mass-flow sensor capable of measuring ultra-low flow rates. The integration of the µF sensor and advanced channel design technology has achieved high accuracy and high range ability at a low cost.
     
 
  Gas Mass Flowmeter (Hydrogen and Helium) (CMS)
The CMS is a highly reliable gas mass flowmeter that uses the Yamatake µF (Micro Flow) sensor as its sensing element. The µF sensor is a MEMS thermal mass-flow sensor capable of measuring ultra-low flow rates. The integration of the µF sensor and advanced channel design technology has achieved high accuracy and high range ability at a low cost.
     
 
  Gas Mass Flowmeter (Aluminum) (CMS1500)
The CMS1500 is a highly reliable gas mass flowmeter that uses the Yamatake µF (Micro Flow) sensor as its sensing element. The µF sensor is a MEMS thermal mass-flow sensor capable of measuring ultra-low flow rates. The integration of the µF sensor and advanced channel design technology has achieved high accuracy and high range ability at a low cost.
     
 
  Panel Mount Mass Flow Controller (MPC)
The MPC is an ultrafast response flow rate sensor that utilizes Yamatake proprietary technology. By integrating a Micro Flow sensor, an ultracompact proportional solenoid valve, a new flow channel system, and advanced control technology, Yamatake has developed a mass flow controller which can be mounted from the front of the control panel.
     
 
  Gas Flow Monitor (Natural Gas and Air) (CMG)
The CMG is a flowmeter designed to measure the fuel flow to a gas burner. Its sensing element is the Micro Flow sensor chip, a MEMS thermal massflow sensor. The monitor display instantaneous or totalized flow. Availabe outputs include alarm, instantaneous flow (analog output), totalizer pulze (NPN open collector) and event, for managing complex air/fuel ratio control and flow control.
     
 
  Gas Flow Monitor (Butane and Propane) (CMG)
The CMG is a flowmeter designed to measure the fuel flow to a gas burner. Its sensing element is the Micro Flow sensor chip, a MEMS thermal massflow sensor. The monitor display instantaneous or totalized flow. Availabe outputs include alarm, instantaneous flow (analog output), totalizer pulze (NPN open collector) and event, for managing complex air/fuel ratio control and flow control.
     
 
  Micro Flow Vortex Gas Flowmeter (MVF)
By using the high-sensitivity and high-speed response Micro Flow sensor for the detection of vortex frequency, the MVF is able to offer a wife range ability of 100:1. Temperature and pressure compensation functions are built in, so there is no need for costly external devices.
     
 
  High-Flow Mass Flowmeter (CML)
The CMP is a high-flow gas mass flowmeter that uses the Yamatake µF (Micro Flow) sensor as its sensing element. The conbination of an ultra-miniature precision sensor and advanced circuit design technology has enabled high accuracy and impressive 160:1 range ability.
     
 
  Chip Pickup Detection Mass-Flow Sensor (MCS100)
The MCS100 is a mass flow sensor used to detect microcomponent pickup. It uses Yamatake's Micro Flow sensor and can be installed very close to the pickup nozzle. Its fast 5ms response is designed for detection in high-speed pickup applications, and its operation is not affected by fluctuations in suction pressure because of its mass-flow measurement principle.
     
 
  Multi-Channel Indicator (MCW400A100)
The MCW400A100 multi-channel indicator can be connected to as many as 4 MCS100 chip pickup detection mass-flow sensors, with a separate flow rate range set of each channel. It indicates instantaneous flow rate and provides switch signal output. Four different operation modes are available. This product is used with the MCS100 for functions such as micro-component pickup detection.
     
 
  Digital Mass Flow Controller Standard Gas Model (Low Flow Rate) (CMQ-V)
The CMQ-V is a digital mass flow controller that combines Yamatake's Micro Flow thermal mass-flow rate sensor and a proportioning solenoid valve with advanced actuator technology. The result is a high-performance and low-cost next-generation controller. Developed for general industrial use, the CMQ-V was designed with high-speed, wide-range ability flow control needs in mind.
     
 
  Digital Mass Flow Controller Standard Gas Model (Medium Flow Rate) (CMQ-V)
The CMQ-V is a digital mass flow controller that combines Yamatake's Micro Flow thermal mass-flow rate sensor and a proportioning solenoid valve with advanced actuator technology. The result is a high-performance and low-cost next-generation controller. Developed for general industrial use, the CMQ-V was designed with high-speed, wide-range ability flow control needs in mind.
     
 
  Digital Mass Flow Controller Hydrogen/Helium Gas Model (CMQ-V) 
The CMQ-V is a digital mass flow controller that combines Yamatake's Micro Flow thermal mass-flow rate sensor and a proportioning solenoid valve with advanced actuator technology. The result is a high-performance and low-cost next-generation controller. Developed for general industrial use, the CMQ-V was designed with high-speed, wide-range ability flow control needs in mind.

- Low flow rate: MQV9020/9050/9500/0005/0010/0050/0200
- Medium flow rate: MQV0500/1000J, K
     
 
  Digital Mass Flow Controller Special Gas Model (Low Flow Rate) (CMQ-V)
The CMQ-V is a digital mass flow controller that combines Yamatake's Micro Flow thermal mass-flow rate sensor and a proportioning solenoid valve with advanced actuator technology. The result is a high-performance and low-cost next-generation controller. Developed for general industrial use, the CMQ-V was designed with high-speed, wide-range ability flow control needs in mind.

This model with O-ring of EPM/EPDM is used for ammonia, acetylene and ethylene oxide gases.
     
 
  Digital Mass Flow Controller Special Gas Model (Medium Flow Rate) (CMQ-V) 
The CMQ-V is a digital mass flow controller that combines Yamatake's Micro Flow thermal mass-flow rate sensor and a proportioning solenoid valve with advanced actuator technology. The result is a high-performance and low-cost next-generation controller. Developed for general industrial use, the CMQ-V was designed with high-speed, wide-range ability flow control needs in mind.

This model with O-ring of EPM/EPDM is used for ammonia, acetylene and ethylene oxide gases.
     
 
  Mist Separators and Filters (FC, MFF100, MFF300)
FC, MFF100 and MFF300 filters protect products by filtering gas to remove foreign matter such as dust, oil, mist, and welding fumes. There is a wide variety of available models, not only for compressed air and low pressure air applications, but also for natural gas, propane, and other flammable gases, carbon dioxide, and for inert gases like argon. These filters fit Yamatake's Micro Flow product series: CMS, CMQ-V, CMG, CML, MPC and MVF. 
Home
    
About Us
    
Contact Us
    
Certifications
    
 
Products
All Products - Phoenix Contact
All Products - Phoenix Contact Automation
All Products - IDEC
All Products - AZBIL
All Products - HITACHI
All Products - SCHAFFNER
All Products - SIEMENS
All Products - RAYTEK
All Products - DANFOSS
All Products - MARECHAL ELECTRIC
All Products - SMA
All Products - ENTES
   
Featured Products
 
News & Events
 
Successful Project References
Tertiary Institution - Automation Lab
Waste Sewage Treatment in Petrochemical Industry
Wire Rope Testing for Marine Offshore Industry
Transportation System
   
Workshops
Phoenix Contact Automation Technology Workshop
IDEC PLC & Operator Interface Workshop
Siemens TIA Portal Programming Workshop
Testimonials
Photo Galleries
Need help? Call us at +65 6767 3232
or email us at This email address is being protected from spambots. You need JavaScript enabled to view it. 31 Mandai Estate #06-08 IMMEDIA @ Innovation Place Singapore 729933